PZ PRODUCTS DENTAL HALTER - $165.00

Introducing a state of the art Halter, like no other, with quick release suspension pulley system.  No annoying buckles to rub the horses’ eyes.               

CURRENTLY OUT OF STOCK
 

DENTAL HEADLIGHT - $749.95

Manufactured by Cherry & Co, USA.
Portable, Halogen light.  Also available with  12V power pack and belt battery pack.

Very durable system, used by Equine Dental Practitioners all over the world. 12 month warranty.

 

THE ORIGINAL BIT FIT DEVICE - $34.95

Great for measuring mouths and bits! 

DREMEL CUT-OFF WHEEL - $24.95

Double sided, diamond coated wheels, holes around perimeter to prevent heat & tooth build up.  Fits 1/8” mandrel. 
Excellent for cutting incisors. 1 wheel per pack. 

CARBIDE CHIP SMALL BALL BURR - $34.95

1/2” carbide chip ball burr, 1/8” shank. Excellent for installing and buffing. Bitseats and reducing/buffing canines. 

CARBIDE CHIP RA-250 DISC (FINE/MED/COARSE) - $139.95

1” diameter Carbide grit disc, fine, 18G, 1/4 x 28 thread.  All of our grit discs have been recessed centre to prevent build up:
Less heat & improved cutting action.Suitable for RA-250 and power float.

DIAMOND GRIT DISC, 1/4”X28 THREAD - $179.95

1” Diameter, diamond grit disc, 24G. For use with power float/RA-250.

2000 SERIES SPECULUM - POA
The most reliable speculum on the market.  Provided with extended length full tooth plates.  This speculum incorporates a tight ratchet system so that the horse is not forced to open their mouth wider than they are comfortable.  Neoprene headstall guaranteed to give a longer lifespan and be easier to keep clean. Extended Full Mouth plates included.

BURGESS WOLF TOOTH ELEVATOR SET - $149.95

Stainless Steel Wolf Tooth Set goes together to form two different styles of wolf tooth elevators with two different sizes of heads. The half-moon heads do not completely surround the wolf tooth so that minimum tissue is affected and removed. 

These elevators allow the quick and easy elevating of wolf teeth and are a pleasure to use

Works with a simple pulley and quick release cleat setup so that horses are quickly and easily released by the practitioner in the case of horse pulling back etc. 

These forceps are small enough to be used one-handed and are a ‘must-have’ for every Equine Dental Practitioner.  The serrated jaw head encases deciduous premolars with ease for a quick removal.

6” BULB HANDLE ELEVATOR - $64.95

19” HEAVY DUTY SIMPLE JOINT MOLAR FORCEPS - $189.95

These heavy duty forceps have a serrated jaw head and are great for removal of permanent molars, together with deciduous premolars. 

19” BOX JOINT STAINLESS STEEL 3 ROOT FORCEPS (2/3 arcades) - $495.00
Currently on special for $395

These forceps are a great tool for extraction of molars with very little crown in aged horses and deciduous premolar caps.  They are designed to ‘suck’ the tooth from the alveolus with as little force and trauma as possible.  The handles are knurled for easier grip.  Recommended for sale as a pair (1/4 arcade set + 2/3 arcade set).

These forceps are a great tool for extraction of molars with very little crown in aged horses and deciduous premolar caps.  They are designed to ‘suck’ the tooth from the alveolus with as little force and trauma as possible.  The handles are knurled for easier grip.  Recommended for sale as a pair (1/4 arcade set + 2/3 arcade set).

SET OF 5 ELEVATORS IN POUCH - $219.95

This set of 6 elevators is a range of versatility for use with elevation of wolf teeth, permanent incisors and deciduous incisors.  6 different shapes and sizes of heads, with some curved heads for ease with removal of longer rooted teeth.  All presented in a zipped case.

DOSE SYRINGE 13OZ - $79.95

LUBRI-FILM PLUS - $19.95
Food grade lubricant, suitable for RA-250, and all other power equipment. 4 oz tube.

5/8” x 1” CARBIDE DRUM BURR, DIAMOND CUT.  1/4” SHANK - $69.95
Excellent for incisor work and reducing high teeth.  Diamond cut lasts longer, & is better balanced than other burrs.

5/8” x 1” CARBIDE BALL BURR, 1/4” SHANK - $69.95
Excellent for bitseating, for use in a large handpiece, with or without a handpiece guard.

1” x 5/8” CUTTING/SANDING WHEEL - $19.95
Great for cutting/shaping incisor teeth.  Double sided, diamond coated.  Works with 1/4” & 1/8” mandrel (included).

4 PK 1” x 5/8” CUTTING/SANDING WHEEL - $24.95
Great for cutting incisors.  Double sided, completely diamond coated.  Works with 1/8” mandrel (included).  This is a set of four wheels.

FOREDOM SMALL HANDPIECE - $119.95
Small handpiece with 3/32” & 1/8” collets. Can be used with/without a guard,  Great for Cutting wheels, bitseating burrs
fits dremel and foredoom units with key tip. Square tip set also available.

FOREDOM LARGE HANDPIECE - $129.95
Large handpiece with 3/32” & 1/8” collets. Fits dremel and foredoom units with key tip.  Square tip set also available.

AGING CHART - $11.00
Small, pocket sized, double sided, laminated aging chart.  Easy to carry with you, entails everything from Galvayne’s Groove to dental stars and deciduous shedding times…

SMALL HANDPIECE GUARD - $77.00
For use with small foredom/dremel handpieces; with cutting wheels or burrs.

LARGE HANDPIECE GUARD - $109.95
For use with large foredom/dremel/archer handpieces; fits 5/8” burrs or smaller.

REPLACEMENT EXTRA LONG 66” OUTER SHAFT FOR ARCHER/FOREDOM FLEX SHAFT   MOTOR - $29.95

REPLACEMENT EXTRA LONG 66” INNER CABLE FOR ARCHER/FOREDOM FLEX SHAFT MOTOR - $34.95

REPLACEMENT OUTER SHAFT FOR ARCHER/FOREDOM FLEX SHAFT   MOTOR - $24.95
Replacement outer flex shaft for Archer Motor.

REPLACEMENT INNER CABLE FOR ARCHER/FOREDOM FLEX SHAFT MOTOR - $19.95
Replacement inner cable flex shaft on Archer Motor.